Ford F150 Bed Cover - F100 Bed Covers Online - Soft Tonneau Cover | Ford F100 - F150 LWB | 1979 to 1991

If you have previously had a Button and Bunji style Tonneau cover read below

 

This Tonneau Cover is for a new Tonneau Cover installation only and is supplied with the fitting kit including Support Bars etc.

 

If you have previously had buttons installed onto your Ute Tub then you need to get a special order Tonneau cover that does not have the bunji's installed it is called a 'Special Order Blank Tonneau' which means that you need to install the bunji's onto the cover into the correct position. The Blank Tonneaus are made to order individually rather than in bulk and are more expensive and may require additional buttons and bunjis than supplied with the standard pack

 

If this is a replacement tonneau to fit to existing installed hooks choose the link below

BLANK TONNEAU

 

Soft Tonneau Cover | Ford F100 / F150 LWB | 1979 to 1991

f100 ute tonneau cover

Additional Information

Part # TONNEAU-STO-106
Brand Made for Coverworld
* Soft Tonneau Cover has a fully water proof lining on the top & the bottom of the Cover
* This Soft Tonneau will NOT Stretch or Shrink, also made with Rot Proof Bonded Thread
* Superier UV Resistance with the Tonneau Cover Material
* Australian made with super fast manufacturing turnaround time and Expedited delivery times
* 5 Year Manufacturers Warranty, Highest Quality Tonneau covers
Material Rip Stop Material
Shipping Made to Order usually dispatched within 3 days

* Required Fields

$249.00
f100 ute tonneau cover

Mouse over to zoom image

Details

Soft Tonneau Cover to fit Ford F100 / F150 LWB
Long Wheel Base
From Date : 1979 | End Date : 1991


  • FORD
  • F100 / F150
  • 1971-1991
  • STANDARD UTE
  • Bunji Loops attach to Buttons on your Ute
  • Soft Felt Inside Lining
  • Strong Rip Stop Material
  • Supplied with Full Fitting Kit
  • 5 Year Warranty



This Tonneau requires you to attach rivets and Buttons to your Vehicle

Has Bunji Loops to attach to the Buttons on your Ute


We offer a superior quality Tonneau Cover which offers unique features such as the "TonnoLock", and anti-theft system that secure this Soft Tonneau Cover to the body of most utes so that it cannot be stolen.


This Tonneau Cover has a super soft felt underside that provides protection to stop the paintwork of your Ute Styleside Ute from being scuffed from Tonneau Cover usage.


The Soft Tonneau is manufactued using quality components such and is provided with a 3 Year manufacturers warranty


The standard Manufacturing lead time is 1-2 days for all Soft Tonneaus and Express couriers are used for quick Australia wide delivery


We also provide Tonneau Cover Cleaner and Aerospace Protectant to help prolong the lifespan even further of this cover


If you have any aftermarket fittings installed that affect the ute tub please contact us prior to ordering. If you have fitted an aftermarket headboard / cabin guard this cover is not compatible

I have already had a Soft Tonneau Cover fitted previously so can I use this Soft Tonneau Cover on my vehicle?

Yes : If you have already had a Tonneau Cover fitted then you will already have buttons on the side of the vehicle, so the Tonneau Cover we will supply is called a "Blank Tonneau" this means that the bunji loops will not be fixed to the Tonneau Cover when it is delivered you will need to install the bunji loops to line up with your existing buttons. A centre punch is required to install the Bunji loops onto blank Tonneau Covers.  The manufacturing time is up to 5 days for a "Blank Tonneau"  This is for Bunji Tonneaus

Blank Tonneau Covers are not supplied with a Tonno Lock

If you have previoulsy had a bunji style tonneau and have buttons drilled into your ute tub you can still fit a clip on tonneau cover but those buttons will not be required or used

Are there any reccomended procedures I should carry out to maximise the lifespan of my Soft Tonneau Cover ?

Yes:  The following procedures should be carried out for general Soft Tonneau Cover Maintenance :

1)Apply Bees Wax or Dri-Lube to Stitching at least twice per year, this will maintain the tonneau covers waterproofing ability and prevent stitching from degrading, a natural result of weather exposure.

2) For best cleaning results we reccomend that you use our Tonneau and Convertible Top Cleaning product, do not use any harsh chemicals or cleaning agents on the Tonneau Cover.

3)For extended lifespan 303 Aerospace Protectant offers advanced UV treatment and has been shown the extend life spans of PVC's and Vinyls exposed to the weather and UV

Do I need to use Support Bars?

Yes : The support bars reduce pressure on the Soft Tonneau under driving conditions, as they prevent flapping which can damage the UV lamination on the Tonneau Cover material.  Most Tonneau Cover are supplied with support bars, check the inclusions for this Tonneau, if support bars are not included and you dont currently have any then we reccomend purchasing them, your warranty could be voided if the cover it not properly used and installed.

Will the Tonneau Cover scratch the sides of my styleside Ute Body?

No : The Tonneau Cover has a soft felt lining runnning along the inside on your Tray edge and it will not scratch your vehicle

I have Sports Bars and / or Ladder Racks on my vehicle can you adjust the Soft Tonneau Cover to fit around them?

No : We do not do any custom modifications to our standard Tonneau Cover patterns, if you require special cut outs then you would need to take the Soft Tonneau Cover to a local Auto Trimmer and ask them to make these modifications for you.  Check this is possible before you place the order.

Do you Offer a Fitting Service?

No, all Tonneau Covers are supplied with esay to follow instructions which you can download before purchasing, typically an installation will take approximately one hour.

Do I need to buy any additional special tools or equipment?

All Fitting instructions detail any extra tools that are required for installation, check the instructions before purchasing, in most cases the standard fitting tools required are:

  • Rivet Gun
  • Drill
  • Marking Pen / Pencil
  • You will need to buy a small padlock to go through the Tonno Lock

I would prefer to use the Clip on No Body Drilling Soft Tonneau but sometimes the items in my ute extend a bit higher than the tray sides so will the Clip on Cover still fit?

Yes, Oversize loads are not a hassle with our stretch cord clip on system that hides out of sight under the cover until needed

I would prefer to use the Clip on No Body Drilling Soft Tonneau Cover but cant find one for my vehicle?

Clip On Soft Tonneau Covers are being introduced for most popular new vehicles as they are released.

What happens if I order the wrong Soft Tonneau Cover?

You should be able to find the exact Soft Tonneau Cover for your vehicle listed on our website, if you cannot see your model listed then please contact us before placing an order, as if your Tonneau Cover needs to be returned because of an ordeirng error then you will need to pay for the return freight costs and deducted from your refund will be a 10% restocking fee and your original delivery cost will not be refunded.  Note special order tonneas which include Blank tonneau covers custom tray covers cannot be returned due to order error.

Do you have a question that we have not answered ? Please detail your question below and we will come back to you soon.

Please describe your question so that we can assist you.
Please put this part number |TONNEAU-STO-106| in the Part Number box below.

Fitting Instructions for Part Number 106

 

F100 LWB Ute : 1976 - 1991

 


 

For new Soft Tonneau Cover installations drilling of buttons will be required for the initial installation

 

You will need the following extra tools for cover installation

 

  • Rivet gun
  • Drill
  • 4.5mm Drill Bit
  • Measuring Tape
  • Silicon Sealant
  • Anti-corrosive primer

 

Contents

  • 1 x Tonneau Cover
  • 4 x Bar Brackets
  • 2 x Long Tonneau Support Bar
  • 9 x LTD Posts
  • 8 x Rivets
  • 1 x Tonneau Lock Kit Including 2 Large Rivets (not included in Blank Tonneau Kit)
  •  

    Please read the fitting instructions before ordering this Soft Tonneau Cover.  

     

    Tonneau Part Number 106 Fitting Instructions

Please view our Standard Coverworld Terms before ordering.

Open Coverworld Terms Here


There is a lot of information on our Terms page, please read them and feel free to ask any questions, we have friendly sales staff ready to take your call or send us an email

This warranty applies to the original purchaser only and is not transferrable.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

 

Soft Tonneau Covers:

5 years against manufacturing and material faults under normal use.

If you wish to make a warranty claim please contact Stormcovers Australia to obtain a Return Authorisation Form and a Return Authorisation Number.  The Return Authorisation Form will need to be completed and attached to the returned goods for processing.

Any unauthorised returns, or forms filled in incorrectly will be refused by our Receiving Department and returned to the sender at the senders expense.

Coverworld and the Coverworld website is not associated with Ford® and we use the Manufacturer and Model names to identify the aftermarket products that we supply to the Vehicle model.  Please contact your local Ford® dealer for branded Ford® products.