Replacement Soft Tonneau Cover | Nissan Navara Dual Cab Ute DX / D22 | 11/2001 to 2005
This Soft Tonneau Cover Designed for the Following Vehicle
- Dual Cab
- 11/2001 to 2005
BLANK SOFT TONNEAU COVERS
If you have existing buttons installed onto your Ute tub then we provide a "Blank" Tonneau cover which means the Tonneau will be the correct size and shape for your specific vehicle but it will not have the bunji loops installed onto the Soft Tonneau cover
Each Soft Tonneau has a Standard Number of inclusions please select from the options below and if you require for example more bunjis than normally supplied for your specific vehicle model according to our guidelines then some extra charges will apply for extra requested items, which are all detailed below.
Because you already have buttons installed we need to supply you with the correct length of Bunji for your existing buttons you can choose to either receive our Standard Tonneau Fitting Kit for your vehicle or you can choose to specify the bunji lengths and button quantities you require specific for your vehicle. If you choose our Standard Fitting Kit and the Bunji loops are not the correct length you will need to order new Bunji loops from us. Check the Instructions Tab to see all the Standard Fitting Kit Inclusions
If you do not know the button position when ordering you can download the Form and send it to us after ordering, we require some specific information before the Tonneau cover is made and dispatched. The reason we ask for some information when you already have buttons installed on your Ute Tub is because we don't know the position or quantity of buttons on your vehicle
I have already had a Soft Tonneau Cover fitted previously so can I use this Soft Tonneau Cover on my vehicle?
Yes : If you have already had a Tonneau Cover fitted then you will already have buttons on the side of the vehicle, so the Tonneau Cover we will supply is called a "Blank Tonneau" this means that the bunji loops will not be fixed to the Tonneau Cover when it is delivered you will need to install the bunji loops to line up with your existing buttons. A centre punch is required to install the Bunji loops onto blank Tonneau Covers. The manufacturing time is up to 5 days for a "Blank Tonneau" This is for Bunji Tonneaus
Blank Tonneau Covers are not supplied with a Tonno Lock
If you have previoulsy had a bunji style tonneau and have buttons drilled into your ute tub you can still fit a clip on tonneau cover but those buttons will not be required or used
Are there any reccomended procedures I should carry out to maximise the lifespan of my Soft Tonneau Cover ?
Yes: The following procedures should be carried out for general Soft Tonneau Cover Maintenance :
1)Apply Bees Wax or Dri-Lube to Stitching at least twice per year, this will maintain the tonneau covers waterproofing ability and prevent stitching from degrading, a natural result of weather exposure.
2) For best cleaning results we reccomend that you use our Tonneau and Convertible Top Cleaning product, do not use any harsh chemicals or cleaning agents on the Tonneau Cover.
3)For extended lifespan 303 Aerospace Protectant offers advanced UV treatment and has been shown the extend life spans of PVC's and Vinyls exposed to the weather and UV
Do I need to use Support Bars?
Yes : The support bars reduce pressure on the Soft Tonneau under driving conditions, as they prevent flapping which can damage the UV lamination on the Tonneau Cover material. Most Tonneau Cover are supplied with support bars, check the inclusions for this Tonneau, if support bars are not included and you dont currently have any then we reccomend purchasing them, your warranty could be voided if the cover it not properly used and installed.
Will the Tonneau Cover scratch the sides of my styleside Ute Body?
No : The Tonneau Cover has a soft felt lining runnning along the inside on your Tray edge and it will not scratch your vehicle
I have Sports Bars and / or Ladder Racks on my vehicle can you adjust the Soft Tonneau Cover to fit around them?
No : We do not do any custom modifications to our standard Tonneau Cover patterns, if you require special cut outs then you would need to take the Soft Tonneau Cover to a local Auto Trimmer and ask them to make these modifications for you. Check this is possible before you place the order.
Do you Offer a Fitting Service?
No, all Tonneau Covers are supplied with esay to follow instructions which you can download before purchasing, typically an installation will take approximately one hour.
Do I need to buy any additional special tools or equipment?
All Fitting instructions detail any extra tools that are required for installation, check the instructions before purchasing, in most cases the standard fitting tools required are:
- Rivet Gun
- Marking Pen / Pencil
- You will need to buy a small padlock to go through the Tonno Lock
I would prefer to use the Clip on No Body Drilling Soft Tonneau but sometimes the items in my ute extend a bit higher than the tray sides so will the Clip on Cover still fit?
Yes, Oversize loads are not a hassle with our stretch cord clip on system that hides out of sight under the cover until needed
I would prefer to use the Clip on No Body Drilling Soft Tonneau Cover but cant find one for my vehicle?
Clip On Soft Tonneau Covers are being introduced for most popular new vehicles as they are released.
What happens if I order the wrong Soft Tonneau Cover?
You should be able to find the exact Soft Tonneau Cover for your vehicle listed on our website, if you cannot see your model listed then please contact us before placing an order, as if your Tonneau Cover needs to be returned because of an ordeirng error then you will need to pay for the return freight costs and deducted from your refund will be a 10% restocking fee and your original delivery cost will not be refunded. Note special order tonneas which include Blank tonneau covers custom tray covers cannot be returned due to order error.
Please describe your question so that we can assist you.
Please put this part number |TONNEAU-321-BLANK| in the Part Number box below.
Fitting Instructions for Part Number 321
Nissan Navara Dual Cab 2WD (DX - D22) : Nov 2001 to 2005
For new Soft Tonneau Cover installations drilling of buttons will be required for the initial installation
You will need the following extra tools for cover installation
- Rivet gun
- 4.5mm Drill Bit
- Measuring Tape
- Silicon Sealant
- Anti-corrosive Primer
- 1 x Tonneau Cover
- 3 x Aluminium Rope Track
- 2 x Bar Brackets
- 21 x Rivets
- 1 x Tonneau Support Bar
- 12 x Rope Buttons
- 2 x Self Adhesive Velcro Straps
- 4 x Pieces of Dowell
- 1 x Tonneau Lock Kit Including 2 Large Rivets (Not included in blank tonneau pack
Please read the fitting instructions before ordering this Soft Tonneau Cover.
|Tonneau Part No. 321 Fitting Instructions|
Please view our Standard Coverworld Terms before ordering.
There is a lot of information on our Terms page, please read them and feel free to ask any questions, we have friendly sales staff ready to take your call or send us an email
Please view our Standard Warranty details before ordering.
Coverworld and the Coverworld website is not associated with Nissan® and we use the Manufacturer and Model names to identify the aftermarket products that we supply to the Vehicle model. Please contact your local Nissan® dealer for branded Nissan® products.