Ford Courier Single Cab Soft Tonneau Cover with existing Installed Buttons on Ute Tub



More than 99% of the the time a Tonneau Cover is installed with Buttons and Bunjis as the image depicts but in some cases you may have more installed buttons on your ute tub or the bunji loops may be longer than the standard 75mm bunji loops.


The standard design Tonneau Cover has 18 installed 75mm Bunji Loops, if this does not match your exisitng buttons then choose the Blank / Replacement Tonneau cover detailed below which you can specify the bunji length required and also you can order more than 18 bunji loops if you need them


Ford Ranger PX XLT Dual Cab Ute | Replacement (Blank) Soft Tonneau Cover | Nov 2011 to Current

Ford Ranger PX XLT Dual Cab Ute | Replacement (Blank) Soft Tonneau Cover | Nov 2011 to Current

Additional Information

Brand No
* This Blank Tonneau Cover should only be ordered if your existing installed buttons are not in the same position as shown on the diagram. If your buttons are in a different position then you need to select this Blank Tonneau
* Soft Tonneau Cover has a fully water proof lining on the top & the bottom of the Cover. Unlike some other Tonneau Cover brands this Soft Tonneau will NOT Stretch or Shrink, also made with Rot Proof Bonded Thread
* Superior UV Resistance with the Tonneau Cover Material
* Australian made with super fast manufacturing turnaround time and Expedited delivery times
* 3 Year Warranty
Material Rip Stop Material
Shipping Made to Order Normal dispatch 2-3 days, up to 5 days for Blank Tonneaus

* Required Fields

Ford Ranger PX XLT Dual Cab Ute | Replacement (Blank) Soft Tonneau Cover | Nov 2011 to Current

Mouse over to zoom image


Soft Tonneau Cover | Replacement Tonneau
From Date : Nov 2011 | End Date : To Current
Product Detail : Headboard / Cabin Guard must be removed
Product Detail : Replacement Tonneau for vehicles with existing installed buttons that do not match the position of our standard tonneau design
Cover designed for Factory Installed Sports Bars

This Soft Tonneau Cover Designed for the Following Vehicle

  • Manufacturer : Ford
  • Model : Ranger
  • Series : PX
  • Body : Dual Cab Ute
  • Fabric : Rip Stop PVC
  • Colour : Black
  • Blank Tonneau for Vehicles with Existing Buttons
  • Supplied with Fitting Components
  • 3 Year Warranty




If you have existing buttons installed onto your Ute tub then we provide a "Blank" Tonneau cover which means the Tonneau will be the correct size and shape for your specific vehicle but it will not have the bunji loops installed onto the Soft Tonneau cover


Each Soft Tonneau has a Standard Number of inclusions please select from the options below and if you require for example more bunjis than normally supplied for your specific vehicle model according to our guidelines then some extra charges will apply for extra requested items, which are all detailed below.


Because you already have buttons installed we need to supply you with the correct length of Bunji for your existing buttons you can choose to either receive our Standard Tonneau Fitting Kit for your vehicle or you can choose to specify the bunji lengths and button quantities you require specific for your vehicle. If you choose our Standard Fitting Kit and the Bunji loops are not the correct length you will need to order new Bunji loops from us. Check the Instructions Tab to see all the Standard Fitting Kit Inclusions

**We are not able to supply Tonneau covers that allow for the use of existing press studs**

**We are not able to supply BLANK continuous Rope Tonneau Covers**


If you do not know the button position when ordering you can download the Form and send it to us after ordering, we require some specific information before the Tonneau cover is made and dispatched. The reason we ask for some information when you already have buttons installed on your Ute Tub is because we don't know the position or quantity of buttons on your vehicle

I have already had a Soft Tonneau Cover fitted previously so can I use this Soft Tonneau Cover on my vehicle?

Yes : If you have already had a Bunji style Tonneau Cover fitted then you will already have buttons on the side of the vehicle, so its important to check the buttons and bunji quantity and position before ordering.  In some infrequent cases the Tonneau Cover we will supply is called a "Blank Tonneau" this means that the bunji loops will not be fixed to the Tonneau Cover when it is delivered you will need to install the bunji loops to line up with your existing buttons. A centre punch is required to install the Bunji loops onto blank Tonneau Covers.  The manufacturing time is up to 5 days for a "Blank Tonneau"


If you have previoulsy had a Clip On Tonneau cover that you are replacing it will be necessary to remove your currently installed side rails and replace with the supplied rails and components with this kit

Blank Tonneau Covers are not supplied with a Tonno Lock.  They are also a special order item and cannot be returned due to change of mind or order error.

Are there any reccomended procedures I should carry out to maximise the lifespan of my Soft Tonneau Cover ?

Yes:  The following procedures should be carried out for general Soft Tonneau Cover Maintenance :

1)Apply Bees Wax or Dri-Lube to Stitching at least twice per year, this will maintain the tonneau covers waterproofing ability and prevent stitching from degrading, a natural result of weather exposure.

2) For best cleaning results we reccomend that you use our Tonneau and Convertible Top Cleaning product, do not use any harsh chemicals or cleaning agents on the Tonneau Cover.

3)For extended lifespan 303 Aerospace Protectant offers advanced UV treatment and has been shown the extend life spans of PVC's and Vinyls exposed to the weather and UV

Do I need to use Support Bars?

Yes : The support bars reduce pressure on the Soft Tonneau under driving conditions, as they prevent flapping which can damage the UV lamination on the Tonneau Cover material.  Most Tonneau Cover are supplied with support bars, check the inclusions for this Tonneau, if support bars are not included and you dont currently have any then we reccomend purchasing them, your warranty could be voided if the cover it not properly used and installed.

Will the Tonneau Cover scratch the sides of my styleside Ute Body?

No : The Tonneau Cover has a soft felt lining runnning along the inside on your Tray edge and it will not scratch your vehicle

I have Sports Bars and / or Ladder Racks on my vehicle can you adjust the Soft Tonneau Cover to fit around them?

No : We do not do any custom modifications to our standard Tonneau Cover patterns, if you require special cut outs then you would need to take the Soft Tonneau Cover to a local Auto Trimmer and ask them to make these modifications for you.  Check this is possible before you place the order.

Do you Offer a Fitting Service?

No, all Tonneau Covers are supplied with esay to follow instructions which you can download before purchasing, typically an installation will take approximately one hour.

Do I need to buy any additional special tools or equipment?

All Fitting instructions detail any extra tools that are required for installation, check the instructions before purchasing, in most cases the standard fitting tools required are:

  • Rivet Gun
  • Drill
  • Marking Pen / Pencil
  • You will need to buy a small padlock to go through the Tonno Lock

I would prefer to use the Clip on No Body Drilling Soft Tonneau but sometimes the items in my ute extend a bit higher than the tray sides so will the Clip on Cover still fit?

Yes, Oversize loads are not a hassle with our stretch cord clip on system that hides out of sight under the cover until needed

I would prefer to use the Clip on No Body Drilling Soft Tonneau Cover but cant find one for my vehicle?

Clip On Soft Tonneau Covers are being introduced for most popular new vehicles as they are released.

What happens if I order the wrong Soft Tonneau Cover?

You should be able to find the exact Soft Tonneau Cover for your vehicle listed on our website, if you cannot see your model listed then please contact us before placing an order, as if your Tonneau Cover needs to be returned because of an ordeirng error then you will need to pay for the return freight costs and deducted from your refund will be a 10% restocking fee and your original delivery cost will not be refunded.  Blank special order tonneau covers cannot be returned so please order a blank tonneau cover carefully.

Do you have a question that we have not answered ? Please detail your question below and we will come back to you soon.

Please describe your question so that we can assist you.
Please put this part number |TONNEAU-142SB-BLANK| in the Part Number box below.

Fitting Instructions for Part Number 143


PX Ranger Space Cab Ute With Headboard : 11/2011 - To Current



For new Soft Tonneau Cover installations drilling of buttons will be required for the initial installation


You will need the following extra tools for cover installation


  • Rivet gun
  • Drill
  • 4.5mm Drill Bit
  • Measuring Tape
  • Silicon Sealant
  • Anti-corrosive primer



    • 1 x Tonneau Cover
    • 3 x Aluminium Rope Track
    • 2 x Bar Brackets
    • 1 x Tonneau Support Bar
    • 22 x Buttons
    • 36 x Rivets
    • 4 x Pieces of Dowell
    • 1 x Tonneau Lock Kit Including 2 Large Rivets (not included in Blank Tonneau Kit)
    • 2 x 100mm Angle Pieces


Please read the fitting instructions before ordering this Soft Tonneau Cover.  


Tonneau Part No. 143 Fitting instructions

Please view our Standard Coverworld Terms before ordering.

Open Coverworld Terms Here

There is a lot of information on our Terms page, please read them and feel free to ask any questions, we have friendly sales staff ready to take your call or send us an email

If you nee to return this made to order tonneau cover due to an order error a 20 restocking fee applies on made to order tonneau covers.

Any component found to be defective in materials or workmanship within the warranty period will be repaired free of charge when returned to manufacturing facility premises in Mitcham, Victoria.

Please note: This warranty does not include transport and insurance charges.The purchaser is required under this warranty, to return this registration form within 28 days from purchase date.

Please complete your Warranty Registration <a href="">Tonneau Cover Warranty Registration Form</a>

A link to the warranty registration is sent automatically after you have made a purchase.

In the event of a warranty claim your Ute cover must be accompanied by proof of purchase receipt. Please ensure you retain your receipt with your warranty card.

Customers will need to pay return postage to Mictham, Victoria.


This warranty is void if the product has been damaged by an accident, abuse, negligence, mishandling or by violent atmospheric conditions.

The warranty is void is modifications to the original cover design are made.


Stormcovers Australia Pty Ltd takes no legal responsibility for injuries or deaths associated with the cover.

Please be aware Tonneau covers are NOT a load restraint.

Caring for your Ute cover: We recommend a mild detergent only and rinse thoroughly. To prolong your Ute Covers life we recommend using 303 Aerospace Protectant

Coverworld and the Coverworld website is not associated with Ford® and we use the Manufacturer and Model names to identify the aftermarket products that we supply to the Vehicle model.  Please contact your local Ford® dealer for branded Ford® products.