Soft Tonneau Cover Dual Cab Holden Rodeo without Headboard

Soft Tonneau for Holden Rodeo RA - RC Dual Cab (Bunji style)

aftermarket rodeo tonneau cover

 

This item now replaced with upgraded 5 Year Warranty cover

 

Soft Tonneau Cover | Holden Rodeo Dual Cab Ute | 2003 to 05/2012 (No Headboard)

Soft Tonneau Cover | Holden Rodeo Dual Cab Ute | 2003 to 05/2012 (No Headboard)

Additional Information

Part # TONNEAU-UCDTHD230B-RODEO
Brand Coverworld Range
* Soft Tonneau Cover has a fully water proof lining on the top & the bottom of the Cover
* Unlike some other Tonneau Cover brands this Soft Tonneau will NOT Stretch or Shrink, also made with Rot Proof Bonded Thread
* Superier UV Resistance with the Tonneau Cover Material
* Australian made with super fast manufacturing turnaround time and Expedited delivery times
* 3 Year Manufacturers Warranty * Warranty card must be completed
Material Rip Stop Material
Shipping Made to Order usually dispatched within 5 days

* Required Fields

Soft Tonneau Cover | Holden Rodeo Dual Cab Ute | 2003 to 05/2012 (No Headboard)

Mouse over to zoom image

Details



Soft Tonneau Cover + Fitting Kit
RC Series : From Date : 07/2008 | End Date : 05/2012
RA Series : From Date : 2003 | End Date : 06/2008
Attaches with J Clip to Font of the Tub (not ropetrack)
Not designed for use with Headboard / Cabin Guard
Compatible with Factory Tub Liner


This Soft Tonneau Cover Designed for the Following Vehicle

  • Holden
  • Rodeo
  • Dual Cab
  • 2003 to 06/2008 (RA series) - 07/2008 to 05/2012 (RC Series)

 


 

Requires Drilling / Installation of buttons. If you have had a Soft Tonneau Installed on your Ute before carefully read the description about the buttons placement

 

This Tonneau Cover has a super soft marine carpet underside that provides protection to stop the paintwork of your Ute Styleside Ute from being scuffed from Tonneau Cover usage.

 

The Soft Tonneau is manufactured using quality components such and is provided with a 3 Year manufacturers warranty

 

The standard Manufacturing lead time is 1-2 days for all Soft Tonneaus and are shipped direct from the Manufacturer

 

We also provide Tonneau Cover Cleaner and Aerospace Protectant to help prolong the lifespan even further of this cover

 

This is an aftermarket tonneau cover, if you have had an existing installed tonneau and have the buttons already fitted on the ute tub you need to check the image that shows the buttons placement and length, if these do not match your existing installed then you need to order a replacement (Blank) tonneau that you can install the bunji loops into to match your existing buttons position

I have already had a Soft Tonneau Cover fitted previously so can I use this Soft Tonneau Cover on my vehicle?

Yes : If you have already had a Bunji style Tonneau Cover fitted then you will already have buttons on the side of the vehicle, so its important to check the buttons and bunji quantity and position before ordering.  In some infrequent cases the Tonneau Cover we will supply is called a "Blank Tonneau" this means that the bunji loops will not be fixed to the Tonneau Cover when it is delivered you will need to install the bunji loops to line up with your existing buttons. A centre punch is required to install the Bunji loops onto blank Tonneau Covers.  The manufacturing time is up to 5 days for a "Blank Tonneau"

 

If you have previoulsy had a Clip On Tonneau cover that you are replacing it will be necessary to remove your currently installed side rails and replace with the supplied rails and components with this kit

Blank Tonneau Covers are not supplied with a Tonno Lock.  They are also a special order item and cannot be returned due to change of mind or order error.

Are there any reccomended procedures I should carry out to maximise the lifespan of my Soft Tonneau Cover ?

Yes:  The following procedures should be carried out for general Soft Tonneau Cover Maintenance :

1)Apply Bees Wax or Dri-Lube to Stitching at least twice per year, this will maintain the tonneau covers waterproofing ability and prevent stitching from degrading, a natural result of weather exposure.

2) For best cleaning results we reccomend that you use our Tonneau and Convertible Top Cleaning product, do not use any harsh chemicals or cleaning agents on the Tonneau Cover.

3)For extended lifespan 303 Aerospace Protectant offers advanced UV treatment and has been shown the extend life spans of PVC's and Vinyls exposed to the weather and UV

Do I need to use Support Bars?

Yes : The support bars reduce pressure on the Soft Tonneau under driving conditions, as they prevent flapping which can damage the UV lamination on the Tonneau Cover material.  Most Tonneau Cover are supplied with support bars, check the inclusions for this Tonneau, if support bars are not included and you dont currently have any then we reccomend purchasing them, your warranty could be voided if the cover it not properly used and installed.

Will the Tonneau Cover scratch the sides of my styleside Ute Body?

No : The Tonneau Cover has a soft felt lining runnning along the inside on your Tray edge and it will not scratch your vehicle

I have Sports Bars and / or Ladder Racks on my vehicle can you adjust the Soft Tonneau Cover to fit around them?

No : We do not do any custom modifications to our standard Tonneau Cover patterns, if you require special cut outs then you would need to take the Soft Tonneau Cover to a local Auto Trimmer and ask them to make these modifications for you.  Check this is possible before you place the order.

Do you Offer a Fitting Service?

No, all Tonneau Covers are supplied with esay to follow instructions which you can download before purchasing, typically an installation will take approximately one hour.

Do I need to buy any additional special tools or equipment?

All Fitting instructions detail any extra tools that are required for installation, check the instructions before purchasing, in most cases the standard fitting tools required are:

  • Rivet Gun
  • Drill
  • Marking Pen / Pencil
  • You will need to buy a small padlock to go through the Tonno Lock

I would prefer to use the Clip on No Body Drilling Soft Tonneau but sometimes the items in my ute extend a bit higher than the tray sides so will the Clip on Cover still fit?

Yes, Oversize loads are not a hassle with our stretch cord clip on system that hides out of sight under the cover until needed

I would prefer to use the Clip on No Body Drilling Soft Tonneau Cover but cant find one for my vehicle?

Clip On Soft Tonneau Covers are being introduced for most popular new vehicles as they are released.

What happens if I order the wrong Soft Tonneau Cover?

You should be able to find the exact Soft Tonneau Cover for your vehicle listed on our website, if you cannot see your model listed then please contact us before placing an order, as if your Tonneau Cover needs to be returned because of an ordeirng error then you will need to pay for the return freight costs and deducted from your refund will be a 10% restocking fee and your original delivery cost will not be refunded.  Blank special order tonneau covers cannot be returned so please order a blank tonneau cover carefully.

Do you have a question that we have not answered ? Please detail your question below and we will come back to you soon.

Please describe your question so that we can assist you.
Please put this part number |TONNEAU-UCDTHD230B-RODEO| in the Part Number box below.

Fitting Instructions for Part Number UCDTHD230B

 

Holden Colorado / Rodeo


This is a Bunji style tonneau cover and buttons needs to be installed onto the ute tub

 

You will need the following extra tools for cover installation

 

  • Pop Rivet gun
  • Drill
  • 4.5mm Drill Bit
  • Measuring Tape
  • Anti-corrosive Primer
  • 3mm Allen Key

 

Contents

    • 1 x Tonneau Cover
    • 18 x Buttons
    • 1 x Aluminium Rope Track
    • 2 x Bar Brackets
    • 1 x Universal Support bars
    • 22 x Rivets

 

Please read the fitting instructions before ordering this Soft Tonneau Cover.  

 

Fitting Instructions


Coverworld Toneau Cover includes a Free Fitting kit

Please view our Standard Coverworld Terms before ordering.

Open Coverworld Terms Here


There is a lot of information on our Terms page, please read them and feel free to ask any questions, we have friendly sales staff ready to take your call or send us an email

If you nee to return this made to order tonneau cover due to an order error a 20 restocking fee applies on made to order tonneau covers.

Any component found to be defective in materials or workmanship within the warranty period will be repaired free of charge when returned to manufacturing facility premises in Mitcham, Victoria.

Please note: This warranty does not include transport and insurance charges.The purchaser is required under this warranty, to return this registration form within 28 days from purchase date.

Please complete your Warranty Registration <a href="http://www.coverworld.com.au/warranty-registration.html">Tonneau Cover Warranty Registration Form</a>

A link to the warranty registration is sent automatically after you have made a purchase.

In the event of a warranty claim your Ute cover must be accompanied by proof of purchase receipt. Please ensure you retain your receipt with your warranty card.

Customers will need to pay return postage to Mictham, Victoria.

 

This warranty is void if the product has been damaged by an accident, abuse, negligence, mishandling or by violent atmospheric conditions.

The warranty is void is modifications to the original cover design are made.

 

Stormcovers Australia Pty Ltd takes no legal responsibility for injuries or deaths associated with the cover.

Please be aware Tonneau covers are NOT a load restraint.

Caring for your Ute cover: We recommend a mild detergent only and rinse thoroughly. To prolong your Ute Covers life we recommend using 303 Aerospace Protectant

Coverworld and the Coverworld website is not associated with Holden® and we use the Manufacturer and Model names to identify the aftermarket products that we supply to the Vehicle model.  Please contact your local Holden® dealer for branded Holden® products.