Soft Tonneau Cover | Ford Ranger PX Dual Cab with Sports Bars

Soft Tonneau Cover | Ford Ranger PX / PX2 XLT Dual Cab with Sports Bars | Nov / 2011 to Current

Ford Ranger PX XLT with Sports bars soft tonneau

Additional Information

Part # TONNEAU-STO-10018
Brand Coverworld range made to order
* Soft Tonneau Cover has a fully water proof lining on the top & the bottom of the Cover
* This Soft Tonneau will NOT Stretch or Shrink, also made with Rot Proof Bonded Thread, all components high quality
* Superier UV Resistance with the Tonneau Cover Material
* Australian made with super fast manufacturing turnaround time and Expedited delivery times
* 5 Year Manufacturers Warranty
Material Rip Stop Material
Shipping Made to Order usually dispatched within 5 days

* Required Fields

$399.00
Ford Ranger PX XLT with Sports bars soft tonneau

Mouse over to zoom image

Details

Soft Tonneau Cover | New Installation Cover + Fitting Kit
From Date : Nov 2011 | End Date : To Current
Product Detail : Clip OnSoft Tonneau Cover
Product Detail : Cabin Guard / Load Rest must be removed

This Soft Tonneau Cover Designed for the Following Vehicle

  • FORD
  • RANGER
  • PX - PX II - PX III
  • Nov 2011 to Current
  • DUAL CAB UTE with SPORTS BARS



Soft Tonneau Cover for Ford Ranger PX Dual Cab with Sports Bars from Nov / 2011 to Current


Over size loads are not are not a problem with a stretch cord clip on system attached to the underside of the cover that enables you to handle over size loads with ease.

Supplied with Full Kit including support bars, this Clip On design Soft Tonneau Cover means you do not have to drill buttons into the Styleside Ute Body, simple to install with a sleek neat finish.


We offer a superior quality Tonneau Cover which offers unique features such as the "TonnoLocking Device", which allows you to easily add a padlock to your cover to keep it secure, the actual lock is not included but the locking fitment braakets are part of the cover fitting kit, this effective anti-theft system that secures this Soft Tonneau Cover to the body of most utes so that it cannot be stolen.


This Tonneau Cover has a super soft felt underside that provides protection to stop the paintwork of your Ute Styleside Ute from being scuffed from Tonneau Cover usage.


The Soft Tonneau is manufactued using quality components such and is provided with a 5 Year manufacturers warranty


The standard Manufacturing lead time is 1-2 days for all Soft Tonneaus and Express couriers are used for quick Australia wide delivery


We also provide Tonneau Cover Cleaner and Aerospace Protectant to help prolong the lifespan even further of this cover


I have already had a Soft Tonneau Cover fitted previously so can I use this Soft Tonneau Cover on my vehicle?

Yes : If you have already had a Tonneau Cover fitted then you will already have buttons on the side of the vehicle, so the Tonneau Cover we will supply is called a "Blank Tonneau" this means that the bunji loops will not be fixed to the Tonneau Cover when it is delivered you will need to install the bunji loops to line up with your existing buttons. A centre punch is required to install the Bunji loops onto blank Tonneau Covers.  The manufacturing time is up to 5 days for a "Blank Tonneau"  This is for Bunji Tonneaus

Blank Tonneau Covers are not supplied with a Tonno Lock

If you have previoulsy had a bunji style tonneau and have buttons drilled into your ute tub you can still fit a clip on tonneau cover but those buttons will not be required or used

Are there any reccomended procedures I should carry out to maximise the lifespan of my Soft Tonneau Cover ?

Yes:  The following procedures should be carried out for general Soft Tonneau Cover Maintenance :

1)Apply Bees Wax or Dri-Lube to Stitching at least twice per year, this will maintain the tonneau covers waterproofing ability and prevent stitching from degrading, a natural result of weather exposure.

2) For best cleaning results we reccomend that you use our Tonneau and Convertible Top Cleaning product, do not use any harsh chemicals or cleaning agents on the Tonneau Cover.

3)For extended lifespan 303 Aerospace Protectant offers advanced UV treatment and has been shown the extend life spans of PVC's and Vinyls exposed to the weather and UV

Do I need to use Support Bars?

Yes : The support bars reduce pressure on the Soft Tonneau under driving conditions, as they prevent flapping which can damage the UV lamination on the Tonneau Cover material.  Most Tonneau Cover are supplied with support bars, check the inclusions for this Tonneau, if support bars are not included and you dont currently have any then we reccomend purchasing them, your warranty could be voided if the cover it not properly used and installed.

Will the Tonneau Cover scratch the sides of my styleside Ute Body?

No : The Tonneau Cover has a soft felt lining runnning along the inside on your Tray edge and it will not scratch your vehicle

I have Sports Bars and / or Ladder Racks on my vehicle can you adjust the Soft Tonneau Cover to fit around them?

No : We do not do any custom modifications to our standard Tonneau Cover patterns, if you require special cut outs then you would need to take the Soft Tonneau Cover to a local Auto Trimmer and ask them to make these modifications for you.  Check this is possible before you place the order.

Do you Offer a Fitting Service?

No, all Tonneau Covers are supplied with esay to follow instructions which you can download before purchasing, typically an installation will take approximately one hour.

Do I need to buy any additional special tools or equipment?

All Fitting instructions detail any extra tools that are required for installation, check the instructions before purchasing, in most cases the standard fitting tools required are:

  • Rivet Gun
  • Drill
  • Marking Pen / Pencil
  • You will need to buy a small padlock to go through the Tonno Lock

I would prefer to use the Clip on No Body Drilling Soft Tonneau but sometimes the items in my ute extend a bit higher than the tray sides so will the Clip on Cover still fit?

Yes, Oversize loads are not a hassle with our stretch cord clip on system that hides out of sight under the cover until needed

I would prefer to use the Clip on No Body Drilling Soft Tonneau Cover but cant find one for my vehicle?

Clip On Soft Tonneau Covers are being introduced for most popular new vehicles as they are released.

What happens if I order the wrong Soft Tonneau Cover?

You should be able to find the exact Soft Tonneau Cover for your vehicle listed on our website, if you cannot see your model listed then please contact us before placing an order, as if your Tonneau Cover needs to be returned because of an ordeirng error then you will need to pay for the return freight costs and deducted from your refund will be a 10% restocking fee and your original delivery cost will not be refunded.  Note special order tonneas which include Blank tonneau covers custom tray covers cannot be returned due to order error.

Do you have a question that we have not answered ? Please detail your question below and we will come back to you soon.

Please describe your question so that we can assist you.
Please put this part number |TONNEAU-STO-10018| in the Part Number box below.

Fitting Instructions for Part Number 10018

Please read the fitting instructions before ordering this Soft Tonneau Cover.  

You will need some additional tools for installation which are detailed on the Instructions document

tonneau-instructions-sto10018.pdf

Please view our Standard Coverworld Terms before ordering.

Open Coverworld Terms Here


There is a lot of information on our Terms page, please read them and feel free to ask any questions, we have friendly sales staff ready to take your call or send us an email

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.


Blank Tonneau Covers (replacement for previously installed buttons) cannnot be returned

 

Soft Tonneaus carry a 5 Year Warranty against manufacturing defects and material faults under normal usage conditions, all covers with STO in the cover part number.

Tuff Lids, Lazerbacks, Fibreglass Lids and EzTops carry a 3 year Warranty agfainst manufacturing defects and material faults under normal use

Ute liners and Mats carry a 3 year Warranty agfainst manufacturing defects and material faults under normal use

 

Warranty period commences on original date of purchase / order.

 

Ths Soft Tonneau Cover Warranty applies to the Original Purchaser and is not transferable.

 

If you wish to make a warranty claim you will need to complete a returns authorisation form, without a returns authorisation goods will not be accepted for return at the warehouse and will be sent back to you at your expense.

Barefoot Property Pty Ltd trading as Coverworld and the Coverworld website is not associated with Ford® and we use the Manufacturer and Model names to identify the aftermarket products that we supply to the Vehicle model.  Please contact your local Ford® dealer for branded Ford® products.