Soft Tonneau Cover | Isuzu DMax | Dual Cab * Without Headboard *Soft Tonneau Cover
This Soft Tonneau Cover Designed for the Following Vehicle
- DUAL CAB
- 2003 to June 2012
- DUAL CAB UTE without HEADBOARD
- Oversize Load System Cover Design
- 5 Year Warranty
Soft Tonneau Cover for Isuzu Dmax without Headboard from 2003 to 06/2012
Supplied with Full Kit including support bars, this Clip On design Soft Tonneau Cover means you do not have to drill buttons into the Styleside Ute Body, simple to install with a sleek neat finish.
We offer a superior quality Tonneau Cover which offers unique features such as the "TonnoLock", and anti-theft system that secure this Soft Tonneau Cover to the body of most utes so that it cannot be stolen.
This Tonneau Cover has a super soft felt underside that provides protection to stop the paintwork of your Ute Styleside Ute from being scuffed from Tonneau Cover usage.
The Soft Tonneau is manufactued using quality components such and is provided with a 5 Year manufacturers warranty
The standard Manufacturing lead time is 1-2 days for all Soft Tonneaus and Express couriers are used for quick Australia wide delivery
We also provide Tonneau Cover Cleaner and Aerospace Protectant to help prolong the lifespan even further of this cover
I have already had a Soft Tonneau Cover fitted previously so can I use this Soft Tonneau Cover on my vehicle?
Yes : If you have already had a Tonneau Cover fitted then you will already have buttons on the side of the vehicle, so the Tonneau Cover we will supply is called a "Blank Tonneau" this means that the bunji loops will not be fixed to the Tonneau Cover when it is delivered you will need to install the bunji loops to line up with your existing buttons. A centre punch is required to install the Bunji loops onto blank Tonneau Covers. The manufacturing time is up to 5 days for a "Blank Tonneau" This is for Bunji Tonneaus
Blank Tonneau Covers are not supplied with a Tonno Lock
If you have previoulsy had a bunji style tonneau and have buttons drilled into your ute tub you can still fit a clip on tonneau cover but those buttons will not be required or used
Are there any reccomended procedures I should carry out to maximise the lifespan of my Soft Tonneau Cover ?
Yes: The following procedures should be carried out for general Soft Tonneau Cover Maintenance :
1)Apply Bees Wax or Dri-Lube to Stitching at least twice per year, this will maintain the tonneau covers waterproofing ability and prevent stitching from degrading, a natural result of weather exposure.
2) For best cleaning results we reccomend that you use our Tonneau and Convertible Top Cleaning product, do not use any harsh chemicals or cleaning agents on the Tonneau Cover.
3)For extended lifespan 303 Aerospace Protectant offers advanced UV treatment and has been shown the extend life spans of PVC's and Vinyls exposed to the weather and UV
Do I need to use Support Bars?
Yes : The support bars reduce pressure on the Soft Tonneau under driving conditions, as they prevent flapping which can damage the UV lamination on the Tonneau Cover material. Most Tonneau Cover are supplied with support bars, check the inclusions for this Tonneau, if support bars are not included and you dont currently have any then we reccomend purchasing them, your warranty could be voided if the cover it not properly used and installed.
Will the Tonneau Cover scratch the sides of my styleside Ute Body?
No : The Tonneau Cover has a soft felt lining runnning along the inside on your Tray edge and it will not scratch your vehicle
I have Sports Bars and / or Ladder Racks on my vehicle can you adjust the Soft Tonneau Cover to fit around them?
No : We do not do any custom modifications to our standard Tonneau Cover patterns, if you require special cut outs then you would need to take the Soft Tonneau Cover to a local Auto Trimmer and ask them to make these modifications for you. Check this is possible before you place the order.
Do you Offer a Fitting Service?
No, all Tonneau Covers are supplied with esay to follow instructions which you can download before purchasing, typically an installation will take approximately one hour.
Do I need to buy any additional special tools or equipment?
All Fitting instructions detail any extra tools that are required for installation, check the instructions before purchasing, in most cases the standard fitting tools required are:
- Rivet Gun
- Marking Pen / Pencil
- You will need to buy a small padlock to go through the Tonno Lock
I would prefer to use the Clip on No Body Drilling Soft Tonneau but sometimes the items in my ute extend a bit higher than the tray sides so will the Clip on Cover still fit?
Yes, Oversize loads are not a hassle with our stretch cord clip on system that hides out of sight under the cover until needed
I would prefer to use the Clip on No Body Drilling Soft Tonneau Cover but cant find one for my vehicle?
Clip On Soft Tonneau Covers are being introduced for most popular new vehicles as they are released.
What happens if I order the wrong Soft Tonneau Cover?
You should be able to find the exact Soft Tonneau Cover for your vehicle listed on our website, if you cannot see your model listed then please contact us before placing an order, as if your Tonneau Cover needs to be returned because of an ordeirng error then you will need to pay for the return freight costs and deducted from your refund will be a 10% restocking fee and your original delivery cost will not be refunded. Note special order tonneas which include Blank tonneau covers custom tray covers cannot be returned due to order error.
Please describe your question so that we can assist you.
Please put this part number |TONNEAU-STO-10568| in the Part Number box below.
Fitting Instructions for Part Number UCDTTIZ230CT and UCDTHD230CT
This is a Bunji style tonneau cover and buttons needs to be installed onto the ute tub
You will need the following extra tools for cover installation
- Pop Rivet gun
- 4.5mm Drill Bit
- Measuring Tape
- Anti-corrosive Primer
- 3mm Allen Key
- 1 x Tonneau Cover
- 2 x Side rails (left / right)
- 1 x Tailgate rail
- 1 x Aluminium Rope Track
- 4 x Bar Brackets
- 2 x Universal Support bars
- 26 x Stainless Steel Rivets
Please read the fitting instructions before ordering this Soft Tonneau Cover.
p>Coverworld Toneau Cover includes a Free Fitting kit which includes the following items
Stainless steel rivets – High quality, extra strong, 4mm wide & 10mm long, durable stainless steel rivets are provided with all of our Cliptight tonneaus. The benefit of stainless steel compared to aluminium is its strength. They will not come lose or break off like the aluminium rivets do overtime.
Adjustable Support Bars x 2– Made of Strong Steel and coated in Zinc Gold Passivate, these 3 piece support bars are highly rust and wear resistant. The support bar can be easily adjusted to fit any width between 1245mm to 1560mm. The adjustable support bar consist of two solid end pieces (slightly pitched) and one straight centre tube with a grub screws at each end to fasten the bars in place once adjusted.
It is important to always keep the support bars installed as they provide adequate protection against water pooling which can cause damage to your Ute or tonneau cover.
Support Bar Protective Sleeves x 2- The protective sleeve is made of our very strong rip-stop tonneau cover material. It is designed to easily slide over the support bar (once assembled) to make a barrier between the metal support bar itself and the tonneau cover. This will reduce any friction between the tonneau cover and the support bar, minimising any wear and tear.
4 x Bar brackets – Bar brackets are needed to hold up your support bars. Thesesupport bars are designed to aid water run off your tonneau cover. Not installing them will cause your tonneau to fill up with water so please install them. Support bar installation will mean that your cover will last for the its expected lifespan and in the unlikely event of a warranty claim not using them may void your warranty.
Right angled Aluminium extrusion brackets –We include Australian Made aluminium Extrusions. These right angled extrusions are made of high grade 3mm thick alloy. They are Shear & Impact resistant to provide superior protection to the top of the tub from any accidental damaged caused by heavy objects.
They are then pop riveted (using only Stainless Steel rivets) from the inside of the tub at the top lip on all 3 sides. The tonneau cover then clips over these extrusions, simple and effective design.
Paint Protection : Epdm paint protection – Included in our unique cover design is 3mm thick and 25mm wide, waterproof neoprene protection strip is located on the underside off the alloy extrusions. It provides extra protection (not double sided tape like other manufacturers). This protection strip is designed to sit in-between the alloy ClipOn brackets and the top of the tub. This ensures correct protection for your Ute body from any marks or scratches during the natural movement of the tonneau cover while providing a seal from the elements. This makes the tonneau cover superior to other tonneau covers on the market. Other products that have Double sided Sticky tape can cause issue with your paintwork; beware of other Manufacturers providing this service.
Easy Fitting Instructions – A Professional installer is not required. With the provided easy to understand, step by step instructions, with pictures, installation is easy. Installation takes on average between 30min to 2 hours (depending on the individual), We have sold many thousands of Tonneau Covers over the years and have never had a customer unable to do the installation. Please check the tools list that you need for the installation.
Please view our Standard Coverworld Terms before ordering.
There is a lot of information on our Terms page, please read them and feel free to ask any questions, we have friendly sales staff ready to take your call or send us an email
If you nee to return this made to order tonneau cover due to an order error a 20 restocking fee applies on made to order tonneau covers.
Any component found to be defective in materials or workmanship within the warranty period will be repaired free of charge when returned to manufacturing facility premises in Mitcham, Victoria.
Please note: This warranty does not include transport and insurance charges.The purchaser is required under this warranty, to return this registration form within 28 days from purchase date.
Please complete your Warranty Registration <a href="http://www.coverworld.com.au/warranty-registration.html">Tonneau Cover Warranty Registration Form</a>
A link to the warranty registration is sent automatically after you have made a purchase.
In the event of a warranty claim your Ute cover must be accompanied by proof of purchase receipt. Please ensure you retain your receipt with your warranty card.
Customers will need to pay return postage to Mictham, Victoria.
This warranty is void if the product has been damaged by an accident, abuse, negligence, mishandling or by violent atmospheric conditions.
The warranty is void is modifications to the original cover design are made.
Stormcovers Australia Pty Ltd takes no legal responsibility for injuries or deaths associated with the cover.
Please be aware Tonneau covers are NOT a load restraint.
Caring for your Ute cover: We recommend a mild detergent only and rinse thoroughly. To prolong your Ute Covers life we recommend using 303 Aerospace Protectant.
Coverworld and the Coverworld website is not associated with Isuzu® and we use the Manufacturer and Model names to identify the aftermarket products that we supply to the Vehicle model. Please contact your local Isuzu® dealer for branded Isuzu® products.