Soft Tonneau Covers for Fleet TradesĀ® Steel Trays Buy Online Aftermarket Soft Tonneau with 5 Year warranty

Flexiglass Soft Tonneau Covers for trays with Rear Ladder Racks - 2016 to Current with 63mm Diamatre Tubing

flexiglass tray tonno cover soft manufacturer where to buy

Additional Information

Brand Made for Coverworld
* Superior Quality Tray Tonneau for Cab Chassis with Flexiglass Trays from 2016 onwards
* Full Fitting Kit Included with Support Bars, Self Installation required, some additional tools required, locking plate also included
* Australian Made Soft Tray Tonneau Cover
* Exceptional Quality Soft Tonneau Cover Built to Last and withstand Australian Weather Conditions
* 5 Year Warranty
Material Rip Stop Material
Shipping Made to Order usually dispatched within 3 days
flexiglass tray tonno cover soft manufacturer where to buy

Mouse over to zoom image


Aluminium Tray Range
Made to Fit Flexiglass Trays with Flexiglass Rear Ladder Racks
Sizes available for all Trays


  • Tray Manufacturer : Flexiglass Trays
  • Models from 2016 with 63mm tubing
  • Detail: Designed specifically for Cab Chassis Utes with Genuine Flexiglass Tray with Rear Ladder Racks
  • Type: For Trays with Rear Ladder Racks
  • Bunji Style Tonneau Cover
  • Soft Tonneau Cover with Full Fitting Kit Including Support Bars
  • Supplied with Step by Step Fitting Instructions
  • Made in Australia
  • Warranty : 5 Years

These soft tonneau covers are bunji style but if you prefer to get a continuous rope tonneau cover then please choose our made to order option in related products.

Its possible that some tray tonneaus in the range by Flexiglass are a different size, if so please choose the custom made to order cover option for your specific tray dimensions

In order to check the correct size cover please check the internal dimensions of your tray if you are unsure about the size

These covers are designed for the trays without any ladder racks fitted to the tray, please order carefully as this is made to order item

These covers are only suitable for the Flexiglass Factory ladder racks which are an optional tray choice when ordering your tray, if you have any other ladder racks

I have already had a Soft Tonneau Cover fitted previously so can I use this Soft Tonneau Cover on my vehicle?

Yes : If you have already had a Tonneau Cover fitted then you will already have buttons on the side of the vehicle, so the Tonneau Cover we will supply is called a "Blank Tonneau" this means that the bunji loops will not be fixed to the Tonneau Cover when it is delivered you will need to install the bunji loops to line up with your existing buttons. A centre punch is required to install the Bunji loops onto blank Tonneau Covers.  The manufacturing time is up to 5 days for a "Blank Tonneau"  This is for Bunji Tonneaus

Blank Tonneau Covers are not supplied with a Tonno Lock

If you have previoulsy had a bunji style tonneau and have buttons drilled into your ute tub you can still fit a clip on tonneau cover but those buttons will not be required or used

Are there any reccomended procedures I should carry out to maximise the lifespan of my Soft Tonneau Cover ?

Yes:  The following procedures should be carried out for general Soft Tonneau Cover Maintenance :

1)Apply Bees Wax or Dri-Lube to Stitching at least twice per year, this will maintain the tonneau covers waterproofing ability and prevent stitching from degrading, a natural result of weather exposure.

2) For best cleaning results we reccomend that you use our Tonneau and Convertible Top Cleaning product, do not use any harsh chemicals or cleaning agents on the Tonneau Cover.

3)For extended lifespan 303 Aerospace Protectant offers advanced UV treatment and has been shown the extend life spans of PVC's and Vinyls exposed to the weather and UV

Do I need to use Support Bars?

Yes : The support bars reduce pressure on the Soft Tonneau under driving conditions, as they prevent flapping which can damage the UV lamination on the Tonneau Cover material.  Most Tonneau Cover are supplied with support bars, check the inclusions for this Tonneau, if support bars are not included and you dont currently have any then we reccomend purchasing them, your warranty could be voided if the cover it not properly used and installed.

Will the Tonneau Cover scratch the sides of my styleside Ute Body?

No : The Tonneau Cover has a soft felt lining runnning along the inside on your Tray edge and it will not scratch your vehicle

I have Sports Bars and / or Ladder Racks on my vehicle can you adjust the Soft Tonneau Cover to fit around them?

No : We do not do any custom modifications to our standard Tonneau Cover patterns, if you require special cut outs then you would need to take the Soft Tonneau Cover to a local Auto Trimmer and ask them to make these modifications for you.  Check this is possible before you place the order.

Do you Offer a Fitting Service?

No, all Tonneau Covers are supplied with esay to follow instructions which you can download before purchasing, typically an installation will take approximately one hour.

Do I need to buy any additional special tools or equipment?

All Fitting instructions detail any extra tools that are required for installation, check the instructions before purchasing, in most cases the standard fitting tools required are:

  • Rivet Gun
  • Drill
  • Marking Pen / Pencil
  • You will need to buy a small padlock to go through the Tonno Lock

I would prefer to use the Clip on No Body Drilling Soft Tonneau but sometimes the items in my ute extend a bit higher than the tray sides so will the Clip on Cover still fit?

Yes, Oversize loads are not a hassle with our stretch cord clip on system that hides out of sight under the cover until needed

I would prefer to use the Clip on No Body Drilling Soft Tonneau Cover but cant find one for my vehicle?

Clip On Soft Tonneau Covers are being introduced for most popular new vehicles as they are released.

What happens if I order the wrong Soft Tonneau Cover?

You should be able to find the exact Soft Tonneau Cover for your vehicle listed on our website, if you cannot see your model listed then please contact us before placing an order, as if your Tonneau Cover needs to be returned because of an ordeirng error then you will need to pay for the return freight costs and deducted from your refund will be a 10% restocking fee and your original delivery cost will not be refunded.  Note special order tonneas which include Blank tonneau covers custom tray covers cannot be returned due to order error.

Fitting Instructions for Fleet Trade Heavy Duty Aluminium Trays


For new Soft Tonneau Cover installations some additional tools are required, all tonneau parts are supplied

You will need the following extra tools for cover installation

  • Rivet gun
  • Drill
  • 4.5mm Drill Bit
  • Measuring Tape
  • Silicon Sealant
  • Anti-corrosive primer


  • 1 X Tonneau cover
  • 4 x Bar Brackets
  • 2 x Tonneau Support Bar
  • 43 x Rivets
  • 2 x Aluminium Rope Track
  • 1 x Lock Bracket
  • 2 x Support Bar Sheath
  • 27 x Rope Buttons
  • 4 x Dowel

Please read the fitting instructions before ordering this Soft Tonneau Cover.  


1800mm x 1900mm Instructions
1950mm x 1900mm Instructions
2100mm x 1900mm Instructions
2250mm x 1900mm Instructions
2400mm x 1900mm Instructions
2465mm x 1900mm Instructions

Please view our Standard Coverworld Terms before ordering.

Open Coverworld Terms Here

There is a lot of information on our Terms page, please read them and feel free to ask any questions, we have friendly sales staff ready to take your call or send us an email

This warranty applies to the original purchaser only and is not transferrable.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.


Soft Tonneau Covers:

5 years against manufacturing and material faults under normal use.

If you wish to make a warranty claim please contact Stormcovers Australia to obtain a Return Authorisation Form and a Return Authorisation Number.  The Return Authorisation Form will need to be completed and attached to the returned goods for processing.

Any unauthorised returns, or forms filled in incorrectly will be refused by our Receiving Department and returned to the sender at the senders expense.

  • 1830 mm L x 1793 mm W  with Rear Ladder Racks | Aluminium Tray - Flexiglass Tray - 63mm Tube
  • 2100 mm L x 1793 mm W with Rear Ladder Racks  Aluminium Tray - Flexiglass Tray - 63mm Tube
  • 2230 mm L x 1793 mm W with Rear Ladder Racks | Aluminium Tray - Flexiglass Tray - 63mm Tube
  • 2350 mm L x 1793 mm W with Rear Ladder Racks | Aluminium Tray- Flexiglass Tray - 63mm Tube
  • 2485 mm L x 1793 mm W with Rear Ladder Racks | Aluminium Tray - Flexiglass Tray - 63mm Tube
  • Yes
  • Yes
  • Yes

* Required Fields

Price as configured: $0.00

Coverworld and the Coverworld website is not associated with Flexiglass™ and we use the Manufacturer and Model names to identify the aftermarket products that we supply to the Vehicle model.  Please contact your local Flexiglass™ dealer for branded Flexiglass™ products.