Custom Cover for Kimberly Karavan Hail protection StormCovers Hail Padding

Kimberly Karavan StormCover

Kimberly Karavan StormCover

Additional Information

Brand Stormcovers
* Exceptionally UV resistant and Waterproof Polyfabric outer layer
* Full Stormcovers offer the very best in Caravan protection, use as an alternative to building a shed
* Unique 3 Piece zip on design developed by Stormcovers Australia
* Manufactured using the finest quality Thread, Webbing, Zippers and all Components for manufacturing Stormcovers
* 4 Year Warranty*
Material StormCoverâ„¢
Shipping Made to Order Lead time depends on Season TBA
Kimberly Karavan StormCover

Mouse over to zoom image

  • I Require a Removeable Zip Out Door
  • Not Required
  • Yes

* Required Fields

Price as configured: $0.00


Stormcover for Kimberly Karavan

  • Mad to fit Kimberly Karavan coevrs the Front Boot and Drawbar
  • Cover has All over Padding
  • 4 Year Warranty

If you wish to cover the spare tyre then add this to the overall length and choose your length according to the length including the spare tyre, Or purchase a separate Spare Tyre Cover

If you have come to this page from a search engine then we recommend looking at our Fabric Comparison Chart for RV Covers before making your Cover selection.

Help with Ordering your StormCover

Question 1:

You can optionally choose to pay for your StormCover in full today or pay a 50% deposit on order

Question 2:

The side of the van will be quite significantly exposed on a full size van that has a side roof mounted Jack Aerial, its best to have the extra flap sewn onto the cover on both sides to make the cover higher, this stops any side height exposure to weather.

Question 3:

For StormCovers we use a material that is 2050mm in height for the side panels, in some cases the van height may be slighter more than this, see image 3 which shows an exposed edge. We can make the side heights higher but this uses more materials so we have chosen to make this optional as usually the side height exposed is not very much and certainly wont get damage by hail.

Question 4:

The door feature on a StormCover be an optional add on feature because it costs more money to install the zippered door access. The zippered door is a completely re-moveable zip out panel that can be simply installed when access is required. If you regularly require access to your van or have a centre door its best to get the door.

Question 5:

We can offer a matching drawbar for your Stormcover for $100 when bought with the Stormcover together, we normally charge $150. This is made from the outer layer of the StormCover, it does not have the foam padded inside lining

Question 6:

Optional products to add to your order are available. Please read our detailed information on the FAQ about static and perspex windows. Aerospace protectant is excellent for your van when covered or not, it provides anti static treatment for vans that are covered and UV treatment for the body of the van and for the actual cover exterior. We believe that by also using Aerospace Protectant on the StormCover outer layer the lifespan of the material can be expanded.

All cover types, whether they are a material cover or a StormCover benefit from being kept clean, the manufacturers of the outer layer material recommend keeping the cover clean, but you should not use a pressure washer or harsh chemicals, our all purpose 303 cleaner is suitable for this purpose.

Information Specific to a Large Van Cover to fit vans up to 640cm / 21ft Overall Length

A StormCover for a 20ft Caravan is a large cover, the roof section will weigh approximately 12-14 KG's and each side section will be approximately 6-7 KG's. You may find installing a cover for this size van easier with assistance from a friend or partner. If you are unsure about the installation process please read our instructions, view our photos or contact us for extra assistance. Coverworld like to recommend the best cover for your specific storage needs and ease of application.

Is the StormCover the best Cover Choice for your 20ft Caravan?

At Coverworld we like our customers to be happy with their purchase which is why we offer great support prior, during and after cover purchase. We are happy to provide guidance about our range of covers to determine which cover is the best cover for your specific needs. If your primary concern is to protect from impact damage from Hail then Yes, this is best cover for your 20ft Caravan.


Can I use my stormcover for long term storage purposes?

Yes, as long you are putting the stormcover onto a clean dry vehicle, but if you put the stormcover onto a wet vehicle it will trap moisture and will cause condensation. Also if you put the stormcover onto a dirty dusty car and leave it for extended periods of time then the dust can scratch the car.

Can you make Stormcover's for any vehicle?

Yes we can make stormcover's for any Car, Caravan, Camper Trailer and 5th wheelers and Motorhomes, but we usually only go up to a maximum length of 10 metres as a a stormcover for a vehicle longer than 10 metres would be difficult to put on, we have made Stormcover's for all kinds of unusual vehicles, so please feel free to contact us with your custom requests

How thick is the foam padding?

We use a 4mm foam padding for the inner layer of all stormcover's, we cannot use a foam any thicker than this because the stormcover would then be unmanageable, we offer the best level of protection that we can within the limits of being practical. A Stormcover will take up between 30-50% of your car boot space (cars only).

For a Caravan or Motorhome Stormcover the foam thickness has been carefully considered, it would be unpractical to use a thicker foam for cover installation.  The Stormcover is already large in size, not heavy in weight and we will not make it any thicker otherwise you would have great difficulty installing the cover.  We have been told by some of our customers about extreme difficulty of installing some other manufacturers covers, in one instance we were told that it took 3 people to install just one caravan cover.

Some other covers have zippers across the roof line, why dont StormCover work like this?

Simply put, our cover design is the easiest for installation and our cover design pattern follows the contours of your caravan or motorhome.  We do not do any joins across the roof line or any cut outs in the roof section as water will leak through this area and it will lead to posisble mould build up under the cover, moisture under a warm dark place is moulds best friend. 

Do you have roof mounted Jack Aerial that is close to edge of the roof line?

If you have an aerial mounted on the roof edge of your caravan it may be necessary to have an extension flap joined onto the bottom of the cover.  If you measure up and over your roof line including aerial and it is not more than 250cm then you dont need an extension.  But if it is longer than 250cm then we recommened adding an extension flap to the bottom of the cover.  The reason we add an extension on the bottom of the cover rather than the top where the aerial is is because the side zippers must be the same length so we cannot make an extension on the top of the cover where the aerial is or the zippers will not work together.  The extension flap does not have the foam padding but is the outer layer StormCover™.  The extension is needed rather the entire cover being made longer because we still need to make the securing straps positioned under the van bottom edge to wrap around securely, if we added the securing straps to a much lower position cover its not possible to easily secure the cover when fitted.

Is the Stormcover totally waterproof?

With the 3 layers combined the cover is totally waterproof. The outer layer is a tough UV laminated poly fabric and the inner foam layer is 100% waterproof, with a third layer of protective film joined to the foam to prevent tearing and damage, with the three combined layers you have a waterproof Stormcover. Where there are zippers in very heavy rain very small trickles of water might pass through the two outer protective layers over the zip and then onto the vehicle but this is a small amount of water which will quickly fall off of the vehicle.

If you own a Caravan, Camper Trailer or Motorhome then a Stormcover will give you absolute peace of mind. Offering more than Hail protection, many RV owners buy Stormcovers as an alternative to putting up a shed, they cost considerably less than a shed and are portable. Stormcovers provide a protective shell that will keep your RV in new condition, not only protecting from the weather but also retaining resale value.

In the lining of the cover material?

No, we have looked into the possibility of adding a fabric layer under the cover but have not put this onto the cover as we beleive it will become mouldy from the occasions it gets wet and then whilst being under the cover in the dark and the warmth.  We have been told of this problem with some other manufacturers covers.  At StormCovers each component has been carefully thought about before being used on the covers

For all Caravans and Motorhomes Stormcovers are manufactured using our own three piece zip on design cover. This makes Stormcovers manageable to take off and on, most people are able to put on a Stormcover alone without any assistance.



In the first instance we require an exact side profile photo of your Caravan, we will use this photo to create the pattern.

If you are unable to take a direct side profile photo with your Caravan or Pop Top Caravan in its current location you will need to pull the van out to take the photo.

A photo provided taken at an angle will result in the pattern being distorted and the measurements will not work for the pattern


In order to detemine the price of your Caravan or Pop Top Stormcover you need the measure the overall exterior measurement at the longest point, if you wish to include your Spare Tyre into the cover design then measure to this point for the correct pricing.

Do not refer to your manufactures brochures or handbooks as in many instances these documents provide information on interior lengths, not exterior.


Once you have sent the photo to us will mark on the photo some specific angles for you to measure, if you are unable to do these we can work from simply length and height but its easier for us to detemine the accuracy of the pattern if you also provide the measurements as per image 3 on the gallery above.


When providing us with the Caravan measurements for your Stormcover do not add anything to any of the measurements you take, we will be adding to the size when we make the pattern.

The measuring is best done with two people which will stop the measuring tape from falling down and giving and incorrect overall measurement.

All Stormcovers for Caravans and Pop Tops are manufactured approximately 20cm longer than the actual RV unit and also and are made wider, a Stormcover will not fit like a glove, they are not designed to be tight fitting.

Also each pattern is individually hand cut and some discrepancies can occur in the measurements this is to be expected with covers of this size and does not make them inferior in design or functionality if a cover is a bit longer or bit shorter than our estimated 20cm extra on the length.

Important Information about Perspex Windows on RV's

perspex and polycarbonate windows are the current trend windows being used by RV manufacturers, they offer a light weight window with good strength, but they are highly susceptible to scratching.  This is a known problem with Perspex and polycarbonate windows and we advise all Rv cover customers to take extra precautions to protect the highly senstive windows. 

We have spoken to RV owners who have new vans that have never been covered and hardly used that have already develeoped scratches on the windows, they are a problem area and you should protect them.

Due to this being a known global problem some companies have developed anti stantic treatments and polishses to try to alleiviate the problems of very easy scratching, note these companies and products exist because of the problems these windows have. It is your responsibility to make sure your windows are protected, and protective care should be carried out when your RV is covered or uncovered.


Do you have a question that we have not answered ? Please detail your question below and we will come back to you soon.

Please describe your question so that we can assist you.
Please put this part number |STORM-KIMBERLY-KARAVAN| in the Part Number box below.
You can download the fitting instructions for Stormcovers Stormcover-Fitting-Instructions.pdf

Stormcover Fitting Instructions for Caravans and RV's

1)Unpack the Stormcoverroof and sides next to your Caravan or Motorhome

2)Roll the Roof Section over the roof of your Caravan or Motorhome

3) Secure the roof section in position with the straps sewnonto the Stormcover

4 Zip the sides of theStormcover onto the roof section and pressdown hook and loopprotective strip

5) If you have ordered aseperate door panelthis can be fully zipped out for easy RV access

For complete RV coverage seperate draw bar covers canbe made for yourCaravan or Motorhome

We also have Tyre Covers, Spare Wheel Covers, Hitch / drawbar covers (Grey Colour Only) and Gas Bottle Covers, travel and storage designs

When installaing a Stormcover you may find it easier to install with a friend, in general application time is apprximately 20 to 30 minutes.  You will need a step-ladder in order to roll out the roof section across your RV roof.  Do not walk on th Stormcover once it is installed it may be slippery.

The Stormcover should never be used when you are towing your RV even for short distances or very low speeds.

Stormcover Fitting Instructions for Cars

Stormcovers should always be installed onto a clean vehicle for long term storage situations

Unroll the Stormcover over the roof line of your car and secure with the 3 provided straps and buckles

Vehicles should never be towed with a Stormcover installed

Care and Maintenance

It is important to keep the surface of your Stormcover reasonably clean but it should never be washed with a pressure washer such as a Gerni, this harsh cleaning method will damage the UV lamination and could significantly reduce the lifespan of your cover.  The cover should be genblty wiped down with a soft cloth and a mild soapy solution without any harsh chemicals, just plain water is okay.

The inner foam lining is sensitive and should be handled carefully, it can become damaged and extra care should be taken around stress points.

In general Stormcovers are mostly maintenance free and if you look after your cover it will provided you with many years of protection.


Please view our Standard Coverworld Terms before ordering.

Open Coverworld Terms Here

There is a lot of information on our Terms page, please read them and feel free to ask any questions, we have friendly sales staff ready to take your call or send us an email

Please view our Standard Stormcover Terms before ordering.

Open Stormcovers Terms Here