Cover Australia | Seat Cover | Car Cover | Patio Furniture | BBQ | Van Cover | Boat & Bimini Cover Online Shop

MASTER G1 Dustop

MASTER G1 Dustop

Additional Information

Part # MASTER-G1-DUSTOP
Brand Covercraft | Coverworld have been a Covercraft Distributor since 2008
* Excellent Dust Barrier with Four Layer Technology for fine particle protection
* Completely Breathable, but only designed for Indoor Garaged Use
* Available in a Tan Colour
* Designed for Indoor use for the ultimate Dust Prevention on your cars surface
* 3 Year Manufacturers Warranty
Material Dustop
Shipping Made to Order manufacturing time 2-4 weeks
MASTER G1 Dustop

Mouse over to zoom image

  • My vehicle is Factory standard without any after market fittings or modifications
  • My vehicle has after market fittings or modifications which require my cover to have a pattern modification
  • My vehicle has a Wing or Body Kit
  • I have a Snorkel fitted to my vehicle
  • I have a Bull Bar Fitted to my vehicle
  • I have a Non Factory Standard Roof Rack Fitted to my Vehicle
  • My vehicle has other modifications that are not listed
  • No Modifications
  • Gust Guard® Cover Clamps
  • CABLE & LOCK
  • Not Required
  • 303 MULTI SURFACE | FABRIC, VINYL, RUBBER, LATEX CLEANER (All Surface Cleaner)
  • 303 High Tech Fabric Guard 32oz / 946ml
  • Not Required
  • Yes

* Required Fields

Price as configured: $0.00

Details

Dustop Fabric is produced in the USA but the cover is made in Australia.

  • Soft But Strong Outer Layers - The two top layers are constructed of a polypropylene / polyethylene composite spunbond. These layers take advantage of the best features of both polymers: the superior softness of polyethylene, with the strength and stability of polypropylene.
  • A melt-blown polypropylene layer serves as a barrier to most dust, dirt and pollution. Dustop’s multi-layer construction provides substantially better dust protection when compared to traditional woven, single layer fabrics
  • Softest Paint Protecting Inner Layer - The high-loft polypropylene / polyethylene inner layer pampers and protects the vehicle’s finish.

 

covercraft dustop car cover custom made

This Car Cover is Made for your Specific Vehicle the price varies according to the vehicle size, price guidelines are below

If you want a car to be as clean when it’s uncovered as it was when covered, this is the fabric to use, Dustop fabric provides superior indoor protection from dust particles from touching the body of your car.

 covercraft car covers


If your vehicle has some aftermarket fittings such as Snorkel, Aftermarket Rear Spoiler etc then there is a charge of $25 to re-program the pattern and the price goes up to the next size.

Can I use the Car Cover for Indoor and Outdoor Use?

Details : It is important to carefully select the cover suited to your vehicles storage conditions.  If you want to use your cover for Indoor Storage Only then 

How will the Custom Made Car Cover fit my car ?

No:  The patterns for Custom Made Car Covers have been tailored to your specific vehicle so you will have body hugging cover that follows the contours and body lines of your vehicle

I have found a model that is very similar to my car will this cover fit?

No : All covers are made for the exact model, series and year if you cannot find your vehicle listed then please contact us as new patterns are added daily and we may now have the pattern for your vehicle.  However we also have universal sizes that are suitable for many vehicles.

I have a factory style spoiler will the cover fit?

If the vehicle is sold as standard with a spoiler it will fit, however in order to be certain please contact us prior to ordering before placing an order, you may need to have a cover modification.

Are the covers easy to put on?

The installation process and time that it takes depends on the size and shape of the vehicle you are covering, as with all covers installation does take a bit of time but as Form Fit covers are not usually taken on and off on a daily basis you should find that the process is not too long and worth it for keeping your beautiful car clean and dust free.

What happens if I order the wrong Car Cover?

You should be able to find the exact Car Cover for your vehicle listed on our website, if you cannot see your model listed then please contact us before placing an order, as your Car Cover is made to order and it cannot be returned.

Is the Cover Easy to Clean?

Each different fabric type has different cleaning methods, please check this before placing your custom made car cover order.

Do I need to use optional items such as Gust Guard and Clamp and Lock?

The Gust Guard is designed to help prevent the cover from lifting in windy conditions we recommend using Gust Guard for long term storage usage and also the lock and cable for added cover security.

Custom made car covers have predesigned patterns however at Coverworld we do not to simply submit orders for manufacturing until we have checked some vehicle details with you.  We do this because there have been times where a customer for example has an aftermarket fitted rear spoiler and this means that the standard pattern is not suitable.  If you are purchasing a cover for a second hand vehicle then its important to find ouf if you do have aftermarket fittings.   The manufacturing lead time is approximate and is from the date that we have received all the vehicle specific information from you. 

Installation

Installing your new cover is simple. To help with this, a "Front" tag is sewn on the inside of the cover so you can easily see which side is the front.  Once you’ve identified the front of the cover, secure this area of the cover around the front tire first, then pull the cover over the top of the handlebars and secure under the rear tire last.

You may wish to optionally reinforce the inside of your cover with duct tape for any areas that will be in direct contact with sharp places. This can help ensure that your cover will last as long as possible.

Removal

The following procedure will make it easier to remove and install the cover whenever it is used:

  • Release both ends of the cover from under the tires.
  • Fold up both sides onto the seat into a long pile.
  • Start at the front tire and fold the cover in one foot folds from the front to the back.

If you use the same procedure each time, you will find it only takes about 30 seconds to install or to remove the cover.

The elastic at each end of the cover will keep it in place under all normal conditions. Use care in installing the cover on a vehicle which has just been driven to be sure the material does not come in contact with hot exhaust pipes.

Cleaning Instructions

The generic cleaning instructions noted below are intended for use with all custom made Fabric covers but you should refer to the specific instruction sheet included with your purchase for any specific fabric care instructions.

Car Cover Performance ca be dramatically affected by dirt that builds up on and within the material.  It can cause the windshield and paint to become dirty and "fogged" as well as create "wicking" where is actually helps pull water through the fabric, nullifying the water resistant properties that the fabric originally may have had.  Cleaning your cover will help to keep your vehicle clean and will ensure that teh serviceable life of the cover is reached.

NEVER ... Clean a car cover in a washer

NEVER ... Use Fabric Softener

NEVER ... Dry a non-woven or speciality type cover in a dryer

(Weathershield® and Form-Fit® covers can be dried in a dryer with regular heat)

1)Using a large commercial washer without agitator, wash the cover using 1/4 cup of 303 Fabric Cleaner All Purpose Cleaner 9some weathershield covers are compact enough to be washed in a normal size washing machine).  Place the cover in the washer and pour the cleaner in the tub after its full with warm water or pour it directly into the machine (necessary for some wall mounted commercial units) then place the cover inside and start the machine.

2)Rinse the cover twice (2 x) to fully remove the cleaner

3)Air dry unless its a cover that is specifically noted that can be dried in a dryer with regular or low heat

A cover may also be cleaned by turning it inside-out on the vehicle

1)Mix 1 ounce 303 fabric cleaner all purpose cleaner per quart of warm water.

2)Spray or sponge onto the cover

3)Rinse with Plain Water (until no suds) and allow to air dry

 

Specific fabric Cleaning Instructions are below:


Care-Instructions-BLOCKIT-380.pdf
Care-instructions-DUSTOP.pdf
Care-Instructions-EVOLUTION.pdf
Care-instructions-FORMFIT.pdf

Please view our Standard Coverworld Terms before ordering.

Open Coverworld Terms Here


There is a lot of information on our Terms page, please read them and feel free to ask any questions, we have friendly sales staff ready to take your call or send us an email

Please view our Made to Order Universal & Custom Fit Car and Motorbike and PWC Covers Warranty details before ordering.

Open Warranty Information Here

 

You can view all the Care and Maintenace Instructions which has the manufacturers details on them below

 

Care and Maintenance of Custom Made Car Covers

 

Each Cover fabric has its own specific care instructions and in addition to this you can view the general cleaning instructions below

 

General Cleaning Instructions

 


Weathershield HP Care and Maintenace

 

Weathershield HD Care and Maintenance

 

Ultratect Care and Maintenance

 

Noah Care and Maintenace

 

FormFit Care and Maintenance

 

Block it Evolution Care and Maintenance

 

Block It 380 Care and Maintenance