Side Console Boat Cover Trailerable and Storage Canvas Material Ocean South MA 205-6

How to Measure for a Semi Custom Fit Side Console Boat Cover

Boat Covers

 

how to measure for side console boat travel cover

Please check your actual boat measurements to get the correct cover fitment

BOAT COVER SIDE CONSOLE 4.1m to 4.3m Length / 1.95m Beam - SEMI CUSTOM FIT

BOAT COVER SIDE CONSOLE 4.1m to 4.3m Length / 1.95m Beam - SEMI CUSTOM FIT

Additional Information

Part # BOAT-MA205-6
Brand OCEAN SOUTH
* Fits boats with Bowrails up to 150mm High
* Good Quality Marine Fabric, Supplied with Tie Down Straps, 320gsm 9oz Material
* Available in Neutral Grey Colour
* Designed for Trailering and also Outdoor Storage conditions
* 1 Year Warranty
Material Cyclone Marine Canvas
Shipping Normally Dispatched 1-2 Days

* Required Fields

$179.00
BOAT COVER SIDE CONSOLE 4.1m to 4.3m Length / 1.95m Beam - SEMI CUSTOM FIT

Mouse over to zoom image

Details

Side Console Boat Cover designed 410cm to 430cm | 195cm Beam
Overall Fabric Length : 4860mm
Overall Fabric Width : 2795mm
IMPORTANT : Read detailed information about Mounted trolling Motors

Boat Cover for Side Console Boats up to 430cm with Beam width up to 195cm

 

The overall length of the Fabric from end to end is 4860mm and 2795mm width, you can measure up and over the boat and across to determine if the cover will fit your boat, this is recommended if you have any extra fittings such as seats, etc that are higher than the side of the boat.

 

Fits Bow rails up to 150mm high

The Semi Custom Fit Boat Covers offer you a Trailerable Boat Cover that is ready made with special cut to allow room for side console boats

 

The fabric is a heavy weight with a high level of water repellency

 

The cover is designed for Trailering at highyway speeds but must be properly installed

 

All Semi Custom Fit Boat Covers are supplied with Tie Down Straps but we offer a number of Boat Cover accessories including Specialist Cleaning solutions recommended for use with this Semi Custom Boat Cover

 

When choosing this cover make sure that the Overall Length of your Boat and Beam are closely matched to this boat Cover Specifications

 

Semi Custom Fit Boat Cover Features

  • 25mm webbing enclosed in hem which can be adjusted with twin metal camlock buckles
  • Double thickness rear section adds strength and protection
  • Rear air-vent allows airflow reducing moisture build up and ballooning when being towed
  • Reinforced polyester webbing loops sewn into the hem for easy fitting of Tie Down straps
  • Reinforced across the Bow Area
  • Motor covers are not built into the cover and you need to buy the Outboard Motor Cover seperately

 

The cover is only suitable for Trailering when properly installed using the provided Tie Down straps


Bow Mounted Angle Bracket Information

If you have an angle bracket on your boat for a mounted trolling motor the cover can be used but will not fit perfectly around this shape, you may need to tie the cover around this point more securely but this can only be determined once the cover has been fitted and installed onto the boat


If you have a Mounted Trolling Motor that you wish to leave fitted when not using your boat then this cover range is not suitable as it will not fit around the motor. Our USA Made to order styled to fit covers are designed to accommodate bow mounted trolling motors

How can I be certain of choosing the correct size cover for my boat?

It is important to properly check your boat length details before ordering, in the semi custom fit range of Ocean South Boat Covers we provide the information for the size boat they are designed to fit and the actual dimensions of the material from one end to the other.

When checking your boat length please dont assume that a model number determines the length of the boat, for example a model number might say 430 in it which could make you think the boat is 430cm long but actually when checking the specs of the boat you may find the boat is 445cm long, this make a difference between which size cover is going to fit your boat.

Also we strongly recommend measuring up and over across the centre and the widest part of the boat to check that the maximum fabric lengths do suit your boat you may find after measuring that you need to change your originally expected cover size.

If you are not sure then please phone or email for assistance we are here to help you get the correct fitting cover.

What is the Difference between the ready made fabrics and the made to order boat Covers Fabrics?

All ready made Boat Covers are manufactured using marine grade fabrics but they are not branded and we do not know the textile mill producing them.  They have performed well over the past few years we have been selling and have not had any UV issues with the material.

Made to order Boat Cover fabrics details:

Sundura is a solution Dyed Polyster fabric, whereas Sunbrella is a Solution Dyed Acrylic Fabric. Polyguard is suitable for use whilst towing your boat, it has excellent tear strength. excellent fade resistance is highly water repellent and it wont stretch or shrink. The Sundura Boat Cover has a 3 Year Guarantee, please see the Guarantee information beforder ordering this cover.

Sunbrella® is the Finest quality Marine Grade Fabric available for Boat Covers, it is designed to last and if you are going to keep your boat for very many years then this is the best cover to buy as it will provide you with many years of usage in even the most extreme weather conditions. Sunbrella Covers have a 5 year guarantee and are available in 20 stock colours but even more colour choices can be selected if you require a specific Sunbrella fabric colour, contact us for special colours. Sunbrella has the most superior UV strength and will last more than 5 years exposed to the UV. Check the Sunbrella Guarantee details before ordering this cover.

Do the Boat Cover Fabrics breath?

The ready made boat covers have a rear air vent which allows airflow which reduces moisture build up inside the cover.

Will the cover go over my Outboard Motor?

No, you need to purchase a seperate outboard motor cover to go with the boat cover.

I have a Bimini Top can I still use my Boat cover?

Yes : The Bimini must be folded flat on the boat and the cover can go over the top of it.

How do I care for my Boat Cover?

To keep your boat cover looking great much longer make sure to support your cover using the Boat Cover support poles. Supporting your cover properly will prevent water from pooling on the cover.

When trailering or storing yor boat with the cover on it use the Tie Down Kit to prevent damage to the cover.

Never wash the boat cover in a machine, you can use a soft bristle brush for cleaning, allow the cover to dry completly before folding and storing it.

We offer specialist cleaning products for boat covers which we reccomend using for the best quality cleanign and care results.

Never use any chemicals or cleaning solutions on your Boat Covers, this will void your warranty and can significantly reduce the lifespan of the fabric.

What happens if I order the wrong Semi Custom Fit Boat Cover?

If you are not sure as to whether the Semi Custom Fit Boat Cover is correct for your Boat then please contact us.  If you need to return the cover to us we will charge a standard   restocking fee and will not refund any freight charges you have originally paid.

Our friendly sales team can help you select the correct cover for your boat if you are not sure which one to select.

Important Information about installing covers onto new Boats

CAUTION: Compounds used in new boats can release gasses that can cause dyes in boat covers to transfer to the boat and cause staining to boat or fittings. It is recommended not to use a boat cover on a new boat in the first four weeks to allow any gases to dissipate.

Fitting covers and Protecting sharp areas on the boat

Before fitting your cover make sure all sharp points or protruding equipment/fittings are well covered with a cloth or sponge to avoid damaging your cover.  Damage caused by protroduding or sharp exterior fittings or angles is not covered by the manufacturers warranty.

Information about Travelling Long Distances with a Cover Installed

Note: If you are trailering your boat we recommend that on long journeys that you routinely check that an even tension is maintained across the cover. This will help prolong the life of your cover.  Damage caused by trailering is not covered by warranty it is essential that the cover is fully and tightly secured before undertaking towing a trailer with a boat and cover installed.

Do you have a question that we have not answered ? Please detail your question below and we will come back to you soon.

Please describe your question so that we can assist you.
Please put this part number |BOAT-MA205-6| in the Part Number box below.

Please view our Standard Coverworld Terms before ordering.

Open Coverworld Terms Here


There is a lot of information on our Terms page, please read them and feel free to ask any questions, we have friendly sales staff ready to take your call or send us an email