Cover Australia | Seat Cover | Car Cover | Patio Furniture | BBQ | Van Cover | Boat & Bimini Cover Online Shop

Dual Entry - Specialty Series Hard Top Boat Cover - Length 625cm - Beam 259cm | 4 Year Warranty | SunDura®

zipper entry boat cover

Additional Information

Part # BOAT-SPEC-90020S
Brand Carver Made in USA
* Styled to Fit Cover in High Quality Solution Dyed Polyester
* Designed for Travel / Trailering and Storage
* Optionally choose to add Tie Down straps if you are using the cover for Trailering purposes, if boat is moored you can choose the Suction Cup securing method
* 11 Colour Choices
* 4 Year Warranty * Please read Warranty Details
Material Sun-Dura™
Shipping Made to Order in USA usually dispatched from Sunshine Coast within 28 days

Details

Styled to Fit Boat Cover with Dual Entry Zippers, designed for Hard Top Boat Covers in Walk Around Cuddy and Centre Console Styles

Include Bow Pulpit and Engine Bracket in centreline measurement in order to determine the correct size.



SunDura® Styled to Fit Cover Features

  • OVERALL LENGTH | up to 625cm (20' 6")
  • MAXIMUM BEAM | 259cm (102")
  • Fabric Weight : 7oz
  • Lighter Weight Material
  • Tear Strength : Good
  • Manufactured with Marine Grade Sun-Dura® Fabric
  • Sun-Dura™ Fabric strong enough for Australian conditions
  • Specialty Series Dual Zipper Entry Boat Cover
  • Includes 2 x Support Poles
  • VHF antennas, Collapsible Light Poles, and Antenna Slot
  • Includes Rope Ratchet System for Easy Installation
  • Includes Reinforcement / Repair Kit
  • Includes Storage Bag
  • 11 Colour Choices
  • 4 Year Warranty*

This cover is excellent for mooring and storage


SunDura® Fabric Detail

Manufactured using Sun-Dura® which is a high quality loom woven solution dyed polyester, manufactured in a leading textile mill in the USA


How to select the correct size cover

Refer to the Diagram that illustrates how to measure your boat to select the correct length cover. You should measure the centreline of your boat (straight line measurement (not up and over the boat) including swim platform if you have one and the beam measurement across the boat. This cover is specifically designed to cover the outboard with an attached rear motor pocket


Cover and Optional Accessories

We recommend also purchasing the Reinforcement / repair patch to reinforce at key stress points to provide extra durability to your boat cover


Cover Information

The Photos are for illustrative purposes only and are not necessarily the exact model


As this cover is made to order please order carefully as made to order covers cannot be returned due to order error or change of mind

* Read the Description, FAQ, Warranty, Instructions and Terms before placing your order and please contact us if you need assistance choosing the correct cover for your boat

What is the Difference between Sundura and Sunbrella Fabric?

Sundura is a solution Dyed Polyster fabric, whereas Sunbrella is a Solution Dyed Acrylic Fabric. Sundura is suitable for use whilst towing your boat, it has excellent tear strength. excellent fade resistance is highly water repellent and it wont stretch or shrink. The Sundura Boat Cover has a 2 Year Guarantee, please see the Guarantee information beforder ordering this cover.

Sunbrella® is the Finest quality Marine Grade Fabric available for Boat Covers, it is designed to last and if you are going to keep your boat for very many years then this is the best cover to buy as it will provide you with many years of usage in even the most extreme weather conditions. Sunbrella Covers have a 5 year guarantee and are available in 20 stock colours but even more colour choices can be selected if you require a specific Sunbrella fabric colour, contact us for special colours. Sunbrella has the most superior UV strength and will last more than 5 years exposed to the UV. Check the Sunbrella Guarantee details before ordering this cover.

Do the Boat Cover Fabrics breath?

Yes:  Sundura and Sunbrella® are fully breathable fabrics which means that moisture inside your boat can escape through the cover and will not stay trapped inside.  This is very important for humid areas and is the best type of Boat cover material to use for your Boat.

Will the cover go over my Outboard Motor?

You can optionally choose to have coverage for the Outboard Motor as part of your Boat Cover, if you do not have an outboard motor then make sure you select the Inboard style cover for your boat.  The boat covers with Outboard Motor coverare are either supplier attached or a seperate cover for your Motor.  The motor cover will be made to cover the largest motor allowed on the boat by law. (USA laws)

I have a Bimini Top can I still use my Boat cover?

Yes : The Bimini must be folded flat on the boat and the cover can go over the top of it.

How do I care for my Boat Cover?

To keep your boat cover looking great much longer make sure to support your cover using the Boat Cover support poles. Supporting your cover properly will prevent water from pooling on the cover.

When trailering or storing yor boat with the cover on it use the Tie Down Kit to prevent damage to the cover.

Never wash the boat cover in a machine, you can use a soft bristle brush for cleaning, allow the cover to dry completly before folding and storing it.

We offer specialist cleaning products for boat covers which we reccomend using for the best quality cleanign and care results.

Never use any chemicals or cleaning solutions on your Boat Covers, this will void your warranty and can significantly reduce the lifespan of the fabric.

What happens if I order the wrong Styled to Fit Boat Cover?

Styled to Fit Covers are manufactured to order, they cannot be returned so please order carefully.  If you are not sure if the Styled to Fit Boat cover is correct for your Boat then please contact us.  if you found the styled to fit Cover for your boat by searching for a cover by the Boat manufacturer then we have matched the cover to your boat model and it is suitable for the standard factory released model without any extra fittings on the boat.

Do you have a question that we have not answered ? Please detail your question below and we will come back to you soon.

Please describe your question so that we can assist you.
Please put this part number |BOAT-SPEC-90020S| in the Part Number box below.

Boat Cover Fitting Instructions


Boat Cover Fitting Instructions

Please view our Standard Coverworld Terms before ordering.

Open Coverworld Terms Here


There is a lot of information on our Terms page, please read them and feel free to ask any questions, we have friendly sales staff ready to take your call or send us an email

Please view our Styled to Fit and Custom Fit Boat Cover Warranty details before ordering.

 

Carver Covers warranty is a limited warranty depending on the material selected


Carver-Boat-Covers-Warranty.pdf

 

Carver Styled to Fit boat Covers are from High Qualty Marine Fabrics and with proper care and maintenance will provide many years of Boat Protection. Its important to read the Warranty Information about Carver Boat Covers

  • Dual Entry - Hard Top Boat Cover - 625cm Length / 259cm Beam | 4 Year Warranty | SunDura®
  • SunDura® | Storm Grey
  • SunDura® | Mist Grey
  • SunDura® | Khaki
  • SunDura® | Black
  • SunDura® | Admiral Navy
  • SunDura® | Cobalt Blue
  • SunDura® | Green
  • SunDura® | Teal
  • SunDura® | Maroon
  • SunDura® | Red
  • SunDura® | Yellow
  • Pack of 12 Tie Down Straps Heavy Duty " FREE"  (Retail Price $29.90) - Only Free with Boat Cover Purchase
  • Pack of 4 - Suction Cups Tie Downs
  • Pack of 8 - Suction Cups Tie Downs
  • Sand Bag Mooring Kit : Pack of 4 Bags
  • Not Required
  • Mesh Storage Bag " FREE"  (Retail Price $9.95)
  • Reinforcement Patch / Repair Kit - 1 Yard Stick on Canvas (recommended to protect any stress points on the cover)
  • 303 Aerospace Protectant 32oz / 946ml
  • Pack of 4 - Suction Cups Tie Downs
  • Pack of 8 - Suction Cups Tie Downs
  • Sand Bag Mooring Kit : Pack of 4 Bags
  • Not Required
  • 303 Multi Surface | Fabric, Vinyl, Rubber, Latex Cleaner
  • 303 High Tech Fabric Guard 32oz / 946ml
  • Not Required
  • Yes

* Required Fields

Price as configured: $0.00

Styled to Fit Boat Cover Features

Made to order in the USA, the Styled to Fit Boat Cover patterns have been expertly designed and they are precision cut with laser technology.

 

All Styled to Fit Boat Covers are supplied with Tie Down Straps and we offer a number of Boat Cover accessories including Specialist Cleaning solutions recommended for use with this High Quality Styled to Fit Boat Cover

 

  • Heavy duty 1/4″ draw rope encased in hem for easy installation and snug fit.
  • Tie down loops sewn every 60cm to 90cm for positioning cover securely.
  • Vinyl reinforcements are sewn in at stress points.
  • Motor covers are provided for outboard models, this is either built into the cover or provided as a separate motor cover.

The cover is only suitable for Trailering when properly installed using the provided Tie Down straps


Coverworld are the leading Cover supplier offering an extensive product range giving you many choices to suit your budget and cover requirements, the products we supply have innovation and continuous product improvement is our motivation. Buy with complete confidence that you are getting the best Boat Covers on the market

 

Note images are for illustrative purposes only and are not necessarily your specific boat model


Please order carefully Styled to Fit Boat Covers are made to order and are not returnable due to ordering error.